High Voltage AC Motor 6kV Air Cooling

Name: High Voltage AC Motor 6kV Air Cooling
Brand: SIMO MOTOR
SKU: 224482454

YRKK Series of high Voltage air cooling ac motor is winding rotor three-phase asynchronous motor, which can adjust starting torque and starting current through adjust rotor external connected additional resistance. Motor proper adopts box-type steel plate welding structure with light weight and good rigidity. This series of motor has advantages of compact structure, light weight, high efficiency, energy-saving, low noise and vibration, high reliability, long service life and convenient installation and maintenance, etc. The motors can operate when ambient temperature is -15℃~+40℃; the altitude ≤1KM; and monthly average air humidity ≤90% (If temperature is 25℃).

Send Inquiry

Description

Technical Parameters

Title:

High Voltage AC Motor 6kV Air Cooling

Brief Introduction

The foundation of YRKK Series of air cooled high Voltage ac motor must be rigid so as to minimize motor vibration and misalignment degree of axis when motor operates;

The size of foundation must be 1.1 times greater than the projection size of motor; according to rough calculation, the weight of foundation shall 2.5 times greater than the gross weight of machine.

The best foundation is reinforced concrete structure, especially for large motor and driven equipment; the foundation can be built on the ground, structural steel frame and floor ground, the total weight (motor, driven equipment and foundation) can not exceed the allowable support load; beam frame must have enough rigidity to ensure the normal operation of motor and be away from resonance region.

The foot surface of motor must be installed on steel gasket or base plate; the top surface of steel gasket or base plate must form a horizontal plane and its elevation shall be slightly lower than the maximum distance from the centerline of motor shaft to footing surface. Before placing the base or base plate on concrete foundation, roughen and wash the top surface of foundation.

The grout blanket of foundation shall be implemented in strict accordance with the requirements so as to ensure the firmness of foundation.

All the mounting pads between footing surface of motor and foundation surface shall be placed well.

The rigidity of foundation and the accurate degree for contact of motor footing surface and foundation surface will directly affect the vibration of motor in use.

Main Technical Parameters

Frame	H800
Power Scope	800~5600kW
Voltage	6kV
Frequency	50Hz, 60Hz
Number of Poles	4P, 6P, 8P, 10P, 12P, 16P
Speed	1500rpm, 1000rpm, 750rpm, 600rpm, 500rpm, 370rpm
Cooling Mechod	IC611
Protection Grade	IP55
Insulation Class	F(155℃), H(180℃)
Duty	S1, S4, S5, S6, S9
Mounting Type	IM B3, IM B35, V15, etc
Warranty	1 Year