3 Phase 4 Pole Induction Motor 0.75KW

Product Introction

This series of 3 phase 4 pole induction motor are suitable for continuous working duty (S1), having the characteristics of low loss, high efficiency, compact structure, stable operation, low vibration, low noise, long service life, convenient use and maintenance, etc. They can be widely mounted in machine tools, water pumps, fans, compressors, reducers, and also suitable for many mechanical transmission equipments, such as transportation, mixing, printing, agricultural machinery, food, etc

IEC 60034-30-1 covers the power range from 0.12 kW up to 1000 kW. Most of the different technical constructions of electric motors are covered as long as they are rated for direct on-line operation. The coverage of the standard includes: • Single speed electric motors (single and three-phase), 50 and 60 Hz • 2, 4, 6 and 8 poles • Rated output PN from 0.12 kW to 1000 kW • Rated voltage UN above 50 V up to 1 kV • Motors capable of continuous operation at their rated power with a temperature rise within the specified insulation temperature class • Motors, marked with any ambient temperature within the range of -20 °C to +60 °C • Motors, marked with an altitude up to 4000 m above sea level 13 By comparing IEC 60034-30-1 to CSA C390-10:2015 and "10CFR431 Subpart B – Electric motors", it can be seen that the efficiency limits and tables are well aligned and their major difference is in the scope of the output power where CSA and 10CFR431 have a maximum power of 500 hp.

There are also some minor differences in the scope of excluded motors. Note: CFR is Code of Federal Regulations. The following motors are excluded from IEC 60034-30-1: • Single-speed motors with 10 or more poles or multi-speed motors • Motors completely integrated into a machine (for example pump, fan or compressor) that cannot be tested separately from the machine • Brake motors, when the brake cannot be dismantled or separately fed.

It is good to mention and emphasize that the IEC 60034-2-1 test method, which is known as an indirect method, is technically equivalent to the test methods in the standards CSA 390-10 and IEEE 112 Method B leading to the equivalent losses and thus efficiency values. Both test methods can be used by ABB and shall be used for both Canada and the US where IEC 60034-2-1 is not recognized yet.

Outline Dimensions

Motor Parameters

Main Technical Parameters

Hot Tags: 3 Phase 4 Pole Induction Motor 0.75KW, China, suppliers, manufacturers, factory, customized , quotation, low price, in stock, made in China, ie2 electric motor, 380v motor, energy saving motor, Low Voltage AC Motor, IEC ac motor, ac slip ring motor