Squirrel Cage Motor

Name: China Customized Squirrel Cage Motor Manufacturers Suppliers Factory - Low Price - SIMO
Brand: SIMO MOTOR
SKU: 223472476

If removing the bearing and greasing of squirrel cage motor, the lubricating grease filled shall account for two thirds of bearing chamber. The scraper used should be avoided from touching any part of the bearing, because these residual fibers may be wedged between rolling elements and lead to damage, especially small bearing.

Send Inquiry

Description

Technical Parameters

Xi’an Simo Motor Co., Ltd. is one of the leading manufacturers and suppliers of squirrel cage motor in China. With abundant experience, we are committed to providing high quality customized products with competitive price. We warmly welcome you to buy bulk premium products made in China here and get quotation from our factory.

Title:

Squirrel Cage Motor

Brief Introduction

In the case of damage, the bearing shall be replaced in accordance with the printed bearing model in the nameplate. Before installing the bearing, it is required to firstly remove the burr, iron filings, rusting, and dirt of fitting surface. The tools for installation must be clean and burr-free. After installation, the rotation check must be performed for the bearing, to ensure the correct installation of the bearing.

While purifying and clearing the motor surface, it is strictly prohibited to spray the water on the motor surface by the spray gun.

When the working air gap is more than the maximum working air gap stipulated in Table (1) due to abrasion of the brake friction plate after the electromagnetic braking three-phase asynchronous motor operates for some time, it is required to remove the brake, clean up the friction surface, and readjust the mounting screw to enable the air gap to achieve the specified value. While adjusting the braking torque, the spring pressure can be adjusted by the adjusting screw to change the braking torque. Attention should be paid to the uniformity of spring pressure while adjusting, for fear of influencing the pull-in and release performance. But in normal case, the manufacturer has adjusted it in the case of delivery, and the user need not adjust.

Main Technical Parameters

Frame:	H355
Warranty:	1 Year
Power Scope:	75KW~315KW
Voltage:	380V/660V
Frequency:	50Hz, 60Hz
Number of Poles:	2P, 4P, 6P, 8P, 10P
Speed:	3000rpm, 1500rpm, 1000rpm, 750rpm, 600rpm
Cooling Method	IC411
Protection Grade	IP55
Insulation Class	F(155℃), H(180℃)
Duty:	S1
Mounting Type	B3
Standard:	IEC
Efficiency Grade:	IE5
Connection:	Delta/Y
Vibration:	≤1.8mm/s
Ambient Temperature:	-15℃ ～ +40℃
Altitude:	≤1000m
Humidity:	Average monthly peak relative humidity is 90%

Outline Dimensions

777

Motor Parameters

888

Applications

This series of motor is commonly used to drive water pumps, fans, compressors, conveyors and other transmission machinery in energy conservation and environmental protection transformation projects, national water conservancy projects, etc.